Products
Products

Underlay

Description:

Quiet-Step Combi-Lay

  • 30% reduction in reflected foot noise compared to normal underlays
  • easy to handle
  • continuous damp proofing in one application*
  • integrated peel and stick strip
  • lay flat polymers for easy installation
  • Super tough tear resistance to tools and boots
  • will not hold water, and will not mildew
  • compatible with standard trims
  • l’nw + c1 = 47. this is a site specific test result and complies with Bca multi-storey requirements. test report available upon request

Specification

  • Reflected foot noise: Reduction – 30%
  • Field impact isolation class: ISO 717/2 – 64 Thickness supplied: ISO 1923 – 2mm
  • Water vapour trans. rate: ASTM E96 – 1.7 g/m 2.24hr
  • Water absorption 28 days: JIS 6767  – 0.03mg/cm
  • Compr. creep (thickness loss): 8hrs – 0.1%
  • 23C at 20 kPa load: 408hrs  – 0.6% ( 10,000hrs – 2%)
  • Compr. strength (25%): ISO 844 – 70kPa

The underlay by which all other underlays are measured when looking to reduce walk sound and minimize multi- storey noise.

 

EasyMatt with SoundGard Technology

-Up to 4 times faster to install than traditional tile and slate

-Cuts easily with a utility knife andno mess

-No screws or nails

-Up to 25 times lighter

-Can be used with engineered wood, laminate or tile

-Reduces floor transmitted sound by up to 20 decibels

-IIC:71 STC:73

 

Quiet-Step Combi-Lay Standard

Recommended for attics and spare bedrooms only (low traffic areas).

  • easy to handle – 2mm thick x 1m wide
  • continuous damp proofing in one application*
  • integrated peel and stick strip
  • lay flat polymers for easy installation
  • will not hold water, and will not mildew
  • compatible with standard trims 
  •  low cost

Specification

 

  • Thickness supplied: 2mm
  • Water vapour transmission rate: 4.62g/m2.24hr
  • Water absorption: 0.07mg/cm2
  • Compr. strength at 25% compression: 30kPa